Manual Vinyl Roll Up Doors

MANUAL OPERATION~
Heavy duty spring loaded roll tube.

MOUNTING OPTIONS~
Header Mount, Face of Wall, Stand off Bracket Mount. Unit width is critical on all header mounted doors. All Bug Barriers are manufactured to + or - 1/8" tolerance.

Minimum width ~ 54" wide.

Maximum size~ 14' wide x 14' high

Doors exceeding 10' high will receive fiberglass windbars for added stability. Doors 11' wide and over will require 4" deep Snaptite tracks.

VINYL ~
22 ounce solid green vinyl with cleare full width vision panel. Yellow safety stripes cover the windbars for high visibility.

TRACKS ~
2” wide and 2” deep Snaptite aluminum tracks. Header mount will take up to 3-1/2" of side room on each side. Wall mount will take up to 6" of side room on each side including weatherstripping.

WEATHERSTRIPPING ~
Grey vinyl weatherstripping is angled to provide a tighter seal preventing bugs and insects easy access or entry,

RESET SYSTEM ~
Interlocking brush seal is incorporated at the top of the Snaptite tracks causing a reset system. Should the door be forced out of the tracks by accidental impact the door is designed to reset back into the guides.

HEAD ROOM ~
6” to 7” will be used for header mount application. 8” is needed above the door opening for wall mount application.

BREAKAWAY FEATURE ~
Unique patented windbars are made of wood wrapped with galvanized steel that remains flexible enough to pop out in case of impact.

OPTIONAL~
Fiberglass windbars are available for doors that require added stability.

CHAIN FALL OPERATION ~
Ability to lift door without spring assistance or a motor.

 



PO Box 95 | Elyria, OH 44036 | 800-701-4782 or 440-324-4112 | Fax: 800-525-3427 or 440-365-8326 |

Bug Barrier® * Specialty Screen Doors * Residential Screen Doors * PVC Strip Doors * Wind Curtains
Salt Dome Doors * Dock Door Enclosures * About Us * Contact Us / RFQ * Distributor Tools * Site Map * Home Page